"Choice is selected" when choice is "Dependent on Other Choices" does not work

[edokan]

I created a distribution with three packages inside (A, B, C)
On the "Presentation" tab, under the "Installation Type" page, I set the attributes of the package B as following:
State: "Dependent on Other Choices"
"Enabled When": "Choice 1" "Is" "Selected"
"Selected When": "Choice 1" "Is" "Selected"

And set A as following:
State: "Unselected"

Then I built and ran the package. On the custom install screen, I set A as checked, I observe that when A is checked B becomes enabled but, not checked. I tried with other combinations, only checked, only enabled, etc. The checked does not work.

Packages Version: 1.2.11 (735)
Os Version: Sequoia 15.6.1
Hardware: Mac Mini M4 2024 with 256GB disk and 16GB RAM.

[packagesdev]

I would tend to say it's just the available behavior for this tricky case and there's no real perfect solution for this case:

• your rule says that whenever A is selected, B should be enabled and selected.
• which means that the user should not be able to unselect B, since when you unselect B, A is still selected and so B should be selected.

I don't have a perfect solution for this case as a solution that involves grouping A and B together and making A be required would only work if it was possible to say that by default the group is unselected, which is not possible (it might be something that needs to be improved).

The other solution is to set B to be always disabled.